Project Director/Senior Project Managers - Houston, TX

Onshore business unit.

Degree engineering professional with seven plus years of experience in executing turn key compressor stations contracts. A working knowledge of equipment sizing , P & ID preparation, pipe line sizing, ability to estimate project costs, knowledge of industrial pipe line codes and standards will be beneficial.

Duties will include estimating projects, reviewing contracts, proposal preparation, contract negotiations, client and management reporting, maintain customer relationships, and executing projects.

<Back to top>

Project Director/Senior  Project Managers - Houston, TX

Offshore business unit.

Degreed engineering professionals with 15 plus years of experience in managing offshore projects. Alliance has openings in the Deepwater Group, the Floating Systems Group as well as the Shelf Business Units. Experience in working with foreign nationals, ability to lead extensive design teams, a proven track record in managing offshore will be required.

Duties will include estimating projects, reviewing contracts, proposal preparation, contract negotiations, client and management reporting, maintain customer relationships, and executing projects.

<Back to top>

Process Engineer

Highly experienced upstream process engineering Technical Consultant needed to work in Houston , TX .  Develop & review conceptual, front end & detail engineering process design deliverables including but not limited to, process simulations, PFDs, P&IDs, equipment lists, process control philosophies, & process utility requirements.  Must have Bachelor's of Science degree + 8 yrs. exp.  Fax resume to Alliance Wood Group Engineering, LP (Attn: HR Dept.) at 281-647-9701.  Put Job Code AWGE-045 on resume.

<Back to top>

Sr. Process Engineer, Lead Process Engineer - Houston, TX

Positions for Process Engineers and Senior Process Engineers with 10+ years experience, preferably in upstream oil & gas process system design. Required experience includes HYSYS simulations, process studies, PFD/P&ID development, HAZOP reviews, equipment selection and sizing, and line sizing. Knowledge of industry practices and standards.

Experience: 10+ years preferred

Education: Bachelors of Science in Chemical or Mechanical Engineering

<Back to top>

Sr. Mechanical Engineer, Lead Mechanical Engineer - Houston, TX

Mechanical Engineers with 10+ years experience, preferably in offshore facilities. Experience in equipment sizing, P&ID development, equipment specification, RFQ preparation and bid evaluation required. Knowledge of offshore industry practices and standards.

Experience: 10+ years

Education: Bachelors of Science in Mechanical Engineering

<Back to top>

Mechanical Engineer, Package Engineer - Houston, TX

Mechanical Engineers with 5+ years experience, preferably in offshore facilities. Experience in equipment sizing, P&ID development, equipment specification, RFQ preparation and bid evaluation required. Knowledge of offshore industry practices and standards.

Experience: 5+ years

Education: Bachelors of Science in Mechanical Engineering

<Back to top>

Rotating Equipment Engineer - Houston, TX

Mechanical Engineer with 7+ years experience with rotating equipment (compressors, pumps, turbines), preferably in offshore facilities. Experience in equipment selection, rating and sizing, specification development, RFQ preparation and bid evaluation required. Knowledge of offshore industry practices and standards.

Experience: 7+ years

Education: Bachelors of Science in Mechanical Engineering

<Back to top>

Sr Compressor Stn Facilities / Mechanical Engineer - Houston, TX

Mechanical Engineer should possess the following attributes associated with natural gas reciprocating and centrifugal compressor stations:

• Practical experience associated with onshore site construction techniques and methodologies
• Hands on experience with the design, construction, commissioning and start-up
• Able to perform conceptual engineering for main process, auxiliary, and utility systems associated with same, i.e. equipment identification, sizing and integration for a complete system
• Able to generate from scratch Process Flow Diagrams and Process and Instrumentation Diagrams
• Able to generate specifications, data sheets and purchase requisitions for reciprocating compressors, separators, filter coalescers, glycol dehydration systems, fuel gas and process gas metering, etc.
• Conduct site surveys of existing facilities to gather operating data and equipment information
• Prepare capital cost estimates and supporting design / construction schedules in line with Client's expectations
• Distribute equipment and supplier drawings to the design disciplines and client personnel as required - coordinate and conduct detailed review of same
• Able recognize and prioritize long lead equipment requirements and expedite vendor drawings to meeting detailed design phase schedule and subsequent construction schedules.
• Develop lump sum construction bid packages and participate in review of same with client and approved construction contractors
• Strong working knowledge of 49 CFR 192, ASME B31.8, ASME B31.3, MSS - SP44 and SP75

General attributes:

• Proficient in Microsoft Office Suite including Word, Excel, Project
• Hydraulic and mechanical line sizing for main process piping, utility piping, blow down systems, etc.
• Strong written and verbal communication skills a must
• Willingness to travel to Continental United States Project Sites - ( 1 trip every 2 months, 3 day duration on average )

Experience: 10+ years

Education: Bachelors of Science in Mechanical Engineering

<Back to top>

Sr. Structural Engineer, Lead Structural Engineer - Houston, TX

Description: Positions for Structural Engineers and Senior Structural Engineers with 10+ years experience, preferably in offshore fixed and/or floating unit topside structures. Required experience includes structural analysis design software programs SCAS, StruCAD, Seasam, ANSYS etc. Knowledge of structural dynamics and industry practices and standards.

Experience: 10+ years preferred

Education: Bachelors of Science in Civil/Structural or Naval Architect Engineering

<Back to top>

Structural Engineer - Houston, TX

Structural Engineers with 3+ years experience, preferably in offshore structures. Experience in structural detail design and calculations, data input and executing structural analysis programs. Knowledge of engineering mechanics and offshore industry practices and standards.

Experience: 3+ years

Education: Bachelors of Science in Civil/Structural Engineering

<Back to top>

Instrument Engineer: - Houston, TX

Description: The Instrument Engineer should possess the following attributes associated with natural gas reciprocating and centrifugal compressor stations, gas storage facilities, pump stations, measurement facilities, or onshore gas processing plants:

• 5-10 years experience with the design of Field Instrumentation and Instrument Control Systems (PLC, Process Control, ESD and F&G Systems).
• Working knowledge of instrumentation requirements for onshore pipeline facilities, including compressor stations, pump stations, meter stations and other pipeline facilities is required.
• Familiarity with applicable codes and standards for onshore pipeline and facility installations will be an advantage.
• The successful candidate will be directly responsible for development of instrument equipment specifications, datasheets, calculations, block diagrams, system configurations, instrumentation drawings, and the complete instrument system design for onshore pipeline and facility type projects.
• Responsibilities will also include the oversight, review and approval of instrumentation design on vendor packages.
• Experience with the development of the instrumentation / control system portion of process and instrumentation diagrams (P&IDs) is required.
• Successful candidates will be strong team players capable of working within tight budgets and deadlines to ensure a quality instrumentation design.

General attributes:

• Proficient in Microsoft Office Suite including Word, Excel, Project
• Proficient in the performance of hydraulic and mechanical line sizing for main process piping, utility piping, blow-down systems, etc.
• Willingness to travel to Continental United States Project Sites - (1 trip every 2 months, 3 day duration on average)
• Strong written and verbal communication skills

Experience: 5+ years

Education: Bachelors of Science

<Back to top>

PDMS Piping Designers / Senior PDMS Piping Designers - Houston

Candidates must be experienced in the layout of equipment and the design of piping systems for the topsides of various offshore facilities including; FPSO, Spar, Cell Spar, TLP, Semi-sub and Fixed Jacket.. A minimum of two years experience of working with PDMS is preferred. Seven years of experience in a similar position is required for the PDMS Piping Designer positions. Ten years of experience in a similar position is required for the Senior PDMS Piping Designer positions.

<Back to top>

Project Controller: - Houston, TX

Project Controller should have the following attributes primarily associated with offshore facilities and onshore pipeline / compression stations:

• Knowledge of engineering, procurement and fabrication cycles.
• Must have good computer skills and a thorough understanding of CPM scheduling techniques.
• Ability to integrate Contractor schedule data into overall Project Master Schedule.
• Work closely with Project Leads and sub-contractors to update activity status and resolve critical items.
• Produce any relevant planning data for project reporting.
• Ability to evaluate project logic network and identify critical and near critical tasks and report same to Project Leads.
• Expedite scheduling information from Leads and subcontractors.
• Maintain a system for progress calculations needed for weekly/monthly progress reporting to the Project Team and Client.

General attributes:

• Proficient in Primavera 3.1 and MS Project
• Proficient in Microsoft Office Suite
• Strong written and verbal skills a must

Education: BS in Business or specialized training in Project Controls.

Experience: 5+ years in Project Controls with at least 3+ years specifically in Oil and Gas industry

<Back to top>

Lead Project Controller: - Houston, TX

Lead Project Controller should have the following attributes primarily associated with offshore facilities and onshore pipeline / compression stations:

• Ability to develop Company planning policies & procedures and custom reporting formats.
• Ability to develop Controls plan, schedules, and all control documents required to respond to proposals/inquiries.
• Full understanding of engineering, procurement and fabrication cycles.
• Must have good computer skills and a thorough understanding of CPM scheduling techniques.
• Must be able to create a project WBS structure and activity codes for all control documentation.
• Ability to integrate Contractor schedule data into overall Project Master Schedule.
• Ability to evaluate logic networks and planning documents of vendors/ subcontractors.
• Direct and supervise Controls staff in the preparation of all Project required cost & schedule data.
• Must be able to review project logic network and closely monitor critical and near critical tasks and report same to Project Leads. Report activities that are behind schedule that may affect critical path or reaching target milestone dates and provide feedback as to their resolution.
• Expedite scheduling information from Leads and subcontractors.
• Develop and maintain a system for progress calculations needed for weekly/monthly progress reporting to the Project Team and Client.
• Work closely with Project Leads and sub-contractors to update activity status and resolve critical items.
• Supervise project controls staff in day to day operations

General attributes:

• Proficient in Primavera 3.1 and MS Project
• Proficient in Microsoft Office Suite
• Strong written and verbal skills a must

Education: BS in Business or related field

Experience: 10+ years in Project Controls with at least 5+ years specifically in Oil and Gas industry.

<Back to top>

Facilities Project Manager - Denver, Colorado

Description: Mechanical Engineer should possess the following attributes associated with onshore natural gas reciprocating and centrifugal compressor stations:

• Practical experience associated with onshore site construction techniques and methodologies
• Hands on experience with the design, construction, commissioning and start-up
• Able to perform conceptual engineering for main process, auxiliary, and utility systems associated with same, i.e. equipment identification, sizing and integration for a complete system
• Able to generate from scratch Process Flow Diagrams and Process and Instrumentation Diagrams
• Able to generate specifications, data sheets and purchase requisitions for reciprocating compressors, separators, filter coalescers, glycol dehydration systems, fuel gas and process gas metering, etc.
• Conduct site surveys of existing facilities to gather operating data and equipment information
• Prepare capital cost estimates and supporting design / construction schedules in line with Client's expectations
• Distribute equipment and supplier drawings to the design disciplines and client personnel as required - coordinate and conduct detailed review of same
• Able recognize and prioritize long lead equipment requirements and expedite vendor drawings to meeting detailed design phase schedule and subsequent construction schedules.
• Develop lump sum construction bid packages and participate in review of same with client and approved construction contractors
• Strong working knowledge of 49 CFR 192, ASME B31.8, ASME B31.3, MSS - SP44 and SP75
• PMI Certification is desirable

General attributes:

• Active state of Colorado PE license
• Proficient in Microsoft Office Suite including Word, Excel, Project
• Hydraulic and mechanical line sizing for main process piping, utility piping, blow down systems, etc.
• Strong written and verbal communication skills a must
• Willingness to travel to Continental United States Project Sites - (approximately 1 trip every 2 months, 3 day duration on average )

Experience: 10+ years

Education: Bachelors of Science in Mechanical Engineering

<Back to top>

 

Project Controller - Denver, Colorado

Project Controller should have the following attributes primarily associated with onshore facilities and onshore pipeline / compression stations:

• Knowledge of engineering, procurement and fabrication cycles
• Must have good computer skills and a thorough understanding of CPM scheduling techniques
• Ability to integrate Contractor schedule data into overall Project Master Schedule
• Work closely with Project Leads and sub-contractors to update activity status and resolve critical items
• Produce any relevant planning data for project reporting
• Ability to evaluate project logic network and identify critical and near critical tasks and report same to Project Leads
• Expedite scheduling information from Leads and subcontractors
• Maintain a system for progress calculations needed for weekly/monthly progress reporting to the Project Team and Client

General attributes:

• Proficient in MS Project
• Proficient in Microsoft Office Suite
• Strong written and verbal communication skills a must

Experience: 5+ years in Project Controls with at least 3+ years specifically in Oil and Gas industry

Education: BS in Business or specialized training in Project Controls

<Back to top>

AutoCAD Pipeline Design Drafter - Denver, Colorado

Description: Pipeline Mapping Design Drafter should possess the following attributes associated with natural gas pipelines and route surveys:

• 3 years experience completing all Mapping, Alignment, and miscellaneous GIS drafting functions using 2- and 3-D CAD software; AutoCAD Map required, BlueSky AlignDB a plus
• Working knowledge of pipeline requirements for onshore pipeline routes, including alignment sheets, crossing permit drawings, property plats and survey data is required
• Familiarity with applicable codes and standards for onshore pipeline alignment sheets will be an advantage
• Ability to complete deliverables for the detailed design phase of a project; ability to work in the field assisting construction personnel with the engineering design work and as-built work
• Capacity to gather route and technical data from survey data, topographic maps and aerial photography
• Successful candidates will be strong team players capable of working within tight budgets and deadlines to ensure a quality piping and instrumentation design

General attributes:

• Proficient in Microsoft Office Suite including Word, Access, Excel, and AutoCAD
• Willingness to travel to Continental United States Project Sites - (minimal)
• Strong written and verbal communication skills

Education: This position requires a technical educational background

Experience: 3+ years

<Back to top>

CADWorx Piping Designer - Denver, Colorado

Description: The CADWorx Piping Designer should possess the following attributes associated with natural gas reciprocating and centrifugal compressor stations, gas storage facilities, pump stations, measurement facilities, and/or onshore gas processing plants:

• 5-10 years experience completing detailed design of piping systems from P&ID’s, as well as multi-discipline drafting functions using 2- and 3-D CAD software; CADWorx Plant and P&ID Professional required
• Working knowledge of piping requirements for onshore pipeline facilities, including compressor stations, pump stations, meter stations and other pipeline facilities is required
• Familiarity with applicable codes and standards for onshore pipeline and facility installations is required
• Ability to complete deliverables for the detailed design phase of a project; ability to work in the field assisting construction personnel with the engineering design work and as-built work
• Capacity to gather dimensional and technical data from an operating facility for revamp or expansion work
• Successful candidates will be strong team players capable of working within tight budgets and deadlines to ensure a quality piping and instrumentation design

General attributes:

• Proficient in Microsoft Office Suite including Word, Excel, Project, and AutoCAD
• Willingness to travel to Continental United States Project Sites - (1 trip every 2 months, 3 day duration on average)
• Strong written and verbal communication skills

Education: This position requires a technical educational background

Experience: 5-10 years

<Back to top>

Mechanical Engineer - Denver, Colorado

Mechanical Engineers with 5+ years experience in the midstream oil and gas industry. Preference will be given to individuals with experience in the design of compressor facilities (ASME B31.3 and B31.8) and pipelines (49 CFR 192 and 195). Must be familiar with: piping specifications, alignment sheets, equipment sizing, P&ID development, equipment specifications, RFQ preparation and bid evaluations.

<Back to top>